Yokogawa YFGW410 User Manual download pdf (Page 53)

<D2. Tools to be Used for the Engineering>

D2-1

IM 01W02D01-01EN

D2. Tools to be Used for the Engineering

In Figure D1-1 Engineering Flow for Wireless System Construction, the tools described in this

User’s Manual are shown in parentheses alongside the tasks.

This chapter describes the following tools included in Figure D1-1.

• Congurator

• Monitor

• Field wireless access point setup tool

• FieldMate

• PRM (Plant Resource Manager)

D2.1 Overview of the Tools

n Congurator

This tool is included in the Field Wireless Management Console that is built into the YFGW410. It

is used for constructing the eld wireless network.

It creates the conguration information for the wireless network conguration that is managed by

the YFGW410 based on the detailed design information of the wireless network. It also creates

conguration data based on the provisioning information of the eld wireless device, which con-

tain information such as the devices to be integrated into the network, the roles of those devices,

the function settings for the data renewal cycles, etc., data allocations for the Modbus registers,

and other information.

These pieces of information are downloaded to the YFGW410 and the eld wireless device.

Congurator is launched from the Field Wireless Management Console on the YFGW410 via an

instance of Internet Explorer on a PC that is connected to maintenance interface or eld network

interface.

n Monitor

This tool is included with the Field Wireless Management Console that is built into the YFGW410.

It is used for monitoring the running status of Field Wireless System constructed .

Monitor displays the Packet Error Rate (PER), the Received Signal Strength Indicator (RSSI),

and the eld wireless network conguration gures for each wireless communication path, as

well as displaying information about the eld wireless device such as the battery life.

It is used for determining the communication stability when the Field Wireless System is started

and for monitoring daily status during operation.

Monitor is launched from the Field Wireless Management Console on the YFGW410 via an

instance of Internet Explorer on a PC that is connected to maintenance interface or eld network

interface.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 201 202

No comments

Yokogawa YFGW410 User Manual Page 53