Yokogawa YFGW510 User Manual download pdf (Page 79)

<G1. Standard Specications>

G1-1

IM 01W02E01-01EN

PART-G. SPECIFICATIONS

G1. Standard Specications

G1.1 Communication Interface Specications

Item

Field Network

Specications

Field Wireless Backbone Specications

Communication

Interface

Standard IEEE802.15.4 IEEE802.11a/b/g

100BASE-TX 100BASE-FX

Frequency 2400–2483.5MHz b/g: 2400-2483.5MHz

a: 5150-5850MHz

–

Raw data rate 250kbps 1~54Mbps 100Mbps 100Mbps

Radio Security AES128bit WPA2-PSK –

RF Transmitter

Power

Max 12dBm

Max 18dBm

–

Connector N type N type RJ-45 SC connector

[ single pole × 2 ]

Cable Type coaxial coaxial Category 5 Multimode ber

(50/125μm or

62.5/125μm)

Antenna +2dBi – –

Remote Antenna +2dBi, +6dBi, +9dBi +2dBi, +6dBi, +9dBi –

Maximum length 500m

b/g: 500m

a: 200m

100m 2000m

Port 1 port Max 2 port 1 port 1 port

Protection – – Surge –

Communication

Protocol

Field Wireless ISA100.11a –

Management,

conguration, etc.

– IEEE1588PTP v2

, Proprietary

*1: In outdoor wiring to Field Network or 100BASE-FX of Field Wireless Backbone, use optical ber cables with a nonmetallic

tension member, combining with YFGW610

*2: This product requires a wireless LAN access point for connection with YFGW410 in the wireless LAN in eld wireless

backbone.

*3: This is the maximum radio output at N-type connector for antenna connection. Radio output power depends on the region

and the antenna type.

*4: 2-pole SC connector cannot be used due to the conduit hole size limitation. SC connector should use Short Boot type.

*5: The maximum length needs perfect conditions without an obstruction for radio wave transmission, using a standard

antenna (2dBi). The maximum length changes with the environmental conditions and installation situations of a site.

*6: Installation of these multiple product and YFGW410 in one eld wireless subnet requires direct connection or the

connection via IEEE1588PTP basis products.

*7: TCP based custom protocol used for communication between this product and YFGW410.

n Communication interface specications for YFGW510 conguration

Interface Item External Specications Remarks

Infrared communication

Communication protocol IrDA-SIR Ver. 1.2

Wavelength 870 nm

Maximum transmission speed 9600 bps

Maximum transmission

distance

30 cm

Number of ports 1

Purpose Initial conguration of YFGW510

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 88 89

Comments to this Manuals

No comments

Yokogawa YFGW510 User Manual Page 79

Comments to this Manuals

Related products and manuals for Sensors Yokogawa YFGW510