Yokogawa Touch Screen GP20 User Manual download pdf (Page 16)

IM 04L51B01-02EN

Operating Procedure

Dummy covers are

attached to empty slots

(with screws).

Modules (five types)

GX10/GP10: Up to 3 modules can be installed.

GX20/GP20: Up to 10 modules can be installed.

Make the GX/GP recognize the

modules (GX/GP reconfiguration).

Configure signal inputs.

Configure functions as

necessary.

Turn on the power.

Lit in red

Alarm activated

Off: Power off

Lit in blue

Running

(No alarm)

Alternates

If preinstalled, modules are preconfigured.

If you rearrange the modules, reconfigure.

Install modules.

Not required

if preinstalled

Modules not installed

Insert until a click is heard

and fasten with screws.*

Modules installed

(10 modules)

Power inlet on

the GP10/GP20

Set the date and time.

Connect I/O signals and power.

Power switch

Manuals for reference

First Step Guide

(IM 04L51B01-02EN)

“Installation and Wiring”

First Step Guide

(IM 04L51B01-02EN)

“

Installation and Wiring

”

First Step Guide

(IM 04L51B01-02EN)

“

Basic Operations

”

First Step Guide

(IM 04L51B01-02EN)

“

Reconfiguring the

GX/GP

”

First Step Guide

(IM 04L51B01-02EN)

“

Basic Operations

”

First Step Guide

(IM 04L51B01-02EN)

“

Basic Operations

”

First Step Guide

(IM 04L51B01-02EN)

“

Basic Operations

”

Recording stopped Recording in progress

Start measuring/recording.

MENU key

Browse tab

Set the date and time.

Start measuring/recording.

Configure input and functions.

Common menu tab

To open, push the front door down and pull it toward you.

1 2 3

M3 screw

terminal

GX90XA

Analog input module

GX90XD

Digital input module

GX90YD

Digital output module

Clamp

terminal

M3 screw

terminal

M3 screw

terminal

Clamp

terminal

To prevent electric shock when

wiring, make sure that the power

supply is turned off.

URL: www.smartdacplus.com/manual/en/

Product user’s manuals can be downloaded or viewed at the

following URL;

Paperless Recorder

User’ s Manual

(IM 04L51B01-01EN)

* Recommended tightening

torque: 0.6 N•m

When you are using the GX/GP for the first time, following the procedure below to quickly start measuring and recording.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Comments to this Manuals

No comments

Yokogawa Touch Screen GP20 User Manual Page 16

Comments to this Manuals

Related products and manuals for Sensors Yokogawa Touch Screen GP20