Yokogawa JUXTA VJH7 User Manual download pdf

User’s

Manual

Model VJH7

Isolator (Multi-function)

(Isolated Single-output and

Isolated Dual-output Types)

IM 77J01H07-01E

1st Edition Nov. 1999

2nd Edition June 2004

1. CAUTIONARY NOTES FOR SAFE

USE OF THE PRODUCT

For the correct use of this product, read through this manual before

use. The following safety symbol is indicated on the product to en-

sure safe use.

CAUTION

If this symbol is indicated on the product, the operator

should refer to the explanation given in the instruction

manual in order to avoid personnel injury or death to either

themselves or other personnel, and/or damage to the instru-

ment. The manual describes the special care the operator

should exercise to avoid shock or other dangers that may re-

sult in injury or loss of life.

The following symbol marks are used only in this manual.

IMPORTANT

Indicates that operating the hardware or software in a par-

ticular manner may damage it or result in a system failure.

NOTE

Draws attention to information that is essential for under-

standing the operations and/or features of the product.

2. CHECKING PRODUCT SPECIFI-

CATIONS AND THE CONTENTS

OF PACKING

(1) Model Number and Specification Check

Check that the model number and specifications shown on the

nameplate attached on the side of the product are as ordered.

(2) Contents of the Packing

Check that the packing contains the following items:

● VJH7 main unit, 1

● Instruction Manual (IM 77J1H07-01E), 1

Accessories:

● Tag number label, 1

● Renge label, 1

● Shunt registor (for specification of current input), 1

3. GENERAL

This plug-in isolator, which belongs to the JUXTA series of signal

conditioners, receives DC current or voltage signals and converts

them to pairs of isolated DC voltage or current signals.

• Output-2 signal is selectable from a DC voltage signal, DC

current signal, communication function (RS-485), and alarm

output (two relay contacts).

4. MOUNTING METHODS

4.1 Wall Mounting

Loosen the main unit-fixing screw of the isolator to disconnect the

main unit from the socket. Next, anchor the socket onto the wall

with screws. Then, plug the main unit into the socket and secure

the main unit with the main unit-fixing screw.

Main

unit-fixing

screw

Socket

Main unit

Threaded hole for

fixing the main unit

Mounting

screws

Unit: mm

29.5 or more

22±0.2

59±0.3

2-M4 or 2-ø4.5 or more

Fig. 4.1

4.2 DIN Rail Mounting

Locate the isolator so that the DIN rail fits into the upper part of

the DIN-rail groove at the rear of the socket, and fasten the socket

using the slide lock at the lower part of the socket.

Slide lock

DIN rail

VIEW A (Rear of socket)

VIEW A

Fig. 4.2

Keep this manual in a safe place.

Network Solutions Business Divisiion

2-9-32, Naka-cho Musashino-shi, Tokyo 180-8750 Japan

Phone: +81-422-52-7179 Facsimile: +81-422-52-6793

1 2 3 4 5

Summary of Contents

Page 1 - Isolator (Multi-function)

User’sManualModel VJH7Isolator (Multi-function)(Isolated Single-output andIsolated Dual-output Types)IM 77J01H07-01EIM 77J01H07-01E1st Edition Nov. 19

Page 2 - 6. EXTERNAL WIRING

Page 3 - 8. SETTING PARAMETERS

Page 4

Page 5 - 10.LIST OF PARAMETERS

Comments to this Manuals

No comments

Yokogawa JUXTA VJH7 User Manual

Browse online or download User Manual for Sensors Yokogawa JUXTA VJH7. Yokogawa JUXTA VJH7 User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for Sensors Yokogawa JUXTA VJH7