Yokogawa JUXTA VJP8 User Manual download pdf

Instruction

Manual

Model VJP8

Pulse Rate Converter (Multi-function)

IM 77J01P08-01E

1st Edition Feb. 2000

2nd Edition June 2004

4. MOUNTING METHODS

4.1 Wall Mounting

Loosen the main unit-fixing screw of the converter to disconnect

the main unit from the socket. Next, anchor the socket onto the

wall with screws. Then, plug the main unit into the socket and se-

cure the main unit with the main unit-fixing screw.

Main

unit-fixing

screw

Socket

Main unit

Threaded hole for

fixing the main unit

Mounting

screws

Fig. 4.1

4.1.1 Mounting Dimensions

Unit: mm

29.5 or more

22±0.2

59±0.3

2-M4 or 2-ø4.5 or more

Fig. 4.2

4.2 DIN Rail Mounting

Locate the converter so that the DIN rail fits into the upper part of

the DIN-rail groove at the rear of the socket, and fasten the socket

using the slide lock at the lower part of the socket.

Slide lock

DIN rail

VIEW A (Rear of socket)

VIEW A

Fig. 4.3

Keep this manual in a safe place.

1. CAUTIONARY NOTES FOR SAFE

USE OF THE PRODUCT

For the correct use of this product, read through this manual before

use. The following safety symbol is indicated on the product to en-

sure safe use.

CAUTION

If this symbol is indicated on the product, the operator

should refer to the explanation given in the instruction

manual in order to avoid personnel injury or death to either

themselves or other personnel, and/or damage to the instru-

ment. The manual describes the special care the operator

should exercise to avoid shock or other dangers that may re-

sult in injury or loss of life.

The following symbol marks are used only in this manual.

IMPORTANT

Indicates that operating the hardware or software in a par-

ticular manner may damage it or result in a system failure.

NOTE

Draws attention to information that is essential for under-

standing the operations and/or features of the product.

2. CHECKING PRODUCT SPECIFI-

CATIONS AND THE CONTENTS

OF PACKING

(1) Model Number and Specification Check

Check that the model number and specifications shown on the

nameplate attached on the side of the product are as ordered.

(2) Contents of the Packing

Check that the packing contains the following items:

● VJP8 main unit, 1

● Instruction Manual (IM 77J01P08-01E), 1

Accessories:

● Tag number label, 1

● Range label, 1

● Shunt registor (when optional code/R is specified), 1

3. GENERAL

The VJP8 is a plug-in pulse rate converter that receives contact, volt-

age or current pulse from a field, and converts it into isolated transis-

tor-contact pulse or contactless AC switch pulse at a preset pulse rate.

The VJP8 can also be used as a pulse signal repeater by setting the

pulse rate and pulse width type.

The VJP8 pulse rate scaler features:

• Either pulse output or communication function (RS-485) is se-

lectable as Output-2.

Network Solutions Business Divisiion

2-9-32, Naka-cho Musashino-shi, Tokyo 180-8750 Japan

Phone: +81-422-52-7179 Facsimile: +81-422-52-6793

1 2 3 4

Summary of Contents

Page 1 - Instruction

InstructionManualModel VJP8Pulse Rate Converter (Multi-function)IM 77J01P08-01EIM 77J01P08-01E1st Edition Feb. 20002nd Edition June 20044. MOUNTING ME

Yokogawa JUXTA VJP8 User Manual

Browse online or download User Manual for Sensors Yokogawa JUXTA VJP8. Yokogawa JUXTA VJP8 User Manual

Summary of Contents

Comments to this Manuals

Yokogawa JUXTA VJP8 User Manual

Browse online or download User Manual for Sensors Yokogawa JUXTA VJP8. Yokogawa JUXTA VJP8 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sensors Yokogawa JUXTA VJP8