Yokogawa Standalone MW100 User Manual

- 1/131 - IM MW100-S16E-1 Ed01 MW100-S16 DNP3.0 User's Manual

- 10/131 - IM MW100-S16E-1 Ed01 Framework of DNP master/client functions of MW100 is shown in Figure 3. DNP master/client functions have two time

- 100/131 - IM MW100-S16E-1 Ed01 2.5.12. DNP slave destination setting (VV) This command is used to configure destination of DNP slave. For imp

- 101/131 - IM MW100-S16E-1 Ed01 2.5.13. DNP server destination setting (VW) This command is used to configure destination of DNP server. For im

- 102/131 - IM MW100-S16E-1 Ed01 2.5.14. DNP application service setting (WW) This command is used to configure application service of DNP slave

- 103/131 - IM MW100-S16E-1 Ed01 2.5.15. DNP application layer setting (WX) This command is used to configure behavior of application layer of D

- 104/131 - IM MW100-S16E-1 Ed01 2.5.16. DNP datalink layer setting (WY) This command is used to configure behavior of datalink layer of DNP pro

- 105/131 - IM MW100-S16E-1 Ed01 2.6. DNP log and summary output Added functions to the log and summary output command (FL) are shown in Table 4

- 106/131 - IM MW100-S16E-1 Ed01 2.6.1. Log and summary output (FL) This command is used to output log or summary. To implement DNP communicatio

- 107/131 - IM MW100-S16E-1 Ed01 MODBUS_S : Modbus slave log MODBUS_T : Modbus server log MATH : Math computation log CMD : D

- 108/131 - IM MW100-S16E-1 Ed01 - Setting to output summary FL p1, p2, p3, p4 (in case p1 is 1) p1 : Output type (1) 1 : Output s

- 109/131 - IM MW100-S16E-1 Ed01 2.6.2. DNP master log output (FL0, DNP3_M) Format and example of DNP master log output is shown in Table 46.

- 11/131 - IM MW100-S16E-1 Ed01 Period of integrity/event poll and publishing commands are configurable at MW100. Parameters for controlling DNP

- 110/131 - IM MW100-S16E-1 Ed01 2.6.3. DNP client log output (FL0, DNP3_C) Format and example of DNP client log output is shown in Table 48.

- 111/131 - IM MW100-S16E-1 Ed01 2.6.4. DNP slave log output (FL0, DNP3_S) Format and example of DNP slave log output is shown in Table 50.

- 112/131 - IM MW100-S16E-1 Ed01 2.6.5. DNP server log output (FL0, DNP3_T) Format and example of DNP server log output is shown in Table 52.

- 113/131 - IM MW100-S16E-1 Ed01 2.6.6. DNP master command status output (FL1, DNP3_MC) Format and example of DNP master command status output

- 114/131 - IM MW100-S16E-1 Ed01 Status of DNP master/client commands are shown in Table 56. Table 56. Status of DNP master/client commands S

- 115/131 - IM MW100-S16E-1 Ed01 2.6.7. DNP master connection status output (FL1, DNP3_MS) Format and example of DNP master connection status

- 116/131 - IM MW100-S16E-1 Ed01 Status of DNP master/client connections are shown in Table 59. Table 59. Status of DNP master/client connect

- 117/131 - IM MW100-S16E-1 Ed01 2.6.8. DNP client command status output (FL1, DNP3_CC) Format and example of DNP client command status output

- 118/131 - IM MW100-S16E-1 Ed01 2.6.9. DNP client connection status output (FL1, DNP3_CS) Format and example of DNP client connection status

- 119/131 - IM MW100-S16E-1 Ed01 2.7. Conversion of channel data Data expression at binary and analog objects in DNP protocol is shown in Figure

- 12/131 - IM MW100-S16E-1 Ed01 2.2.1. DNP master/client specification Basic specification of DNP master/client functions is shown in Table 5.

- 120/131 - IM MW100-S16E-1 Ed01 Bit composition of Flag is shown in Table 64. When the measurement or computation of MW100 has successfully exec

- 121/131 - IM MW100-S16E-1 Ed01 MW100 uses only the bit 0 (Online), bit 1 (Restarted) and bit 5 (Over-Range), and other bits will be kept un-ass

- 122/131 - IM MW100-S16E-1 Ed01 Mapping rules of MW100 channel data to the specific variation of DNP object objects are shown in Table 66 to Tab

- 123/131 - IM MW100-S16E-1 Ed01 Table 67. Mapping rule of channel data (2/3 - for integer) Value on DNP object Kind Narrative Int 16 Int 32 + O

- 124/131 - IM MW100-S16E-1 Ed01 Table 68. Mapping rule of channel data (3/3 - for floating point) Value on DNP object Kind Narrative Short Float

- 125/131 - IM MW100-S16E-1 Ed01 3. Appendix 3.1. DNP device profile DNP device profile of MW100 special firmware for DNP protocol is shown in

- 126/131 - IM MW100-S16E-1 Ed01 Table 70. DNP device profile (2/3) DNP 3 DEVICE PROFILE DOCUMENT Timeouts while waiting for : Data Link Conf

- 127/131 - IM MW100-S16E-1 Ed01 Table 71. DNP device profile (3/3) DNP 3 DEVICE PROFILE DOCUMENT Default Binary Object/Variation : Default S

- 128/131 - IM MW100-S16E-1 Ed01 3.2. DNP object implementation table DNP object implementation table of DNP slave/server function in MW100 is s

- 129/131 - IM MW100-S16E-1 Ed01 Table 73. DNP object implementation table (2/4) DNP3 OBJECT IMPLEMENTATION TABLE OBJECT REQUEST RESPONSE Grp

- 13/131 - IM MW100-S16E-1 Ed01 2.2.2. Enabling DNP master/client functions To use DNP master/client functions of MW100, user should enable thes

- 130/131 - IM MW100-S16E-1 Ed01 Table 74. DNP object implementation table (3/4) DNP3 OBJECT IMPLEMENTATION TABLE OBJECT REQUEST RESPONSE Grp

- 131/131 - IM MW100-S16E-1 Ed01 Table 75. DNP object implementation table (4/4) DNP3 OBJECT IMPLEMENTATION TABLE OBJECT REQUEST RESPONSE Grp

- 14/131 - IM MW100-S16E-1 Ed01 Figure 5. Required steps to enable DNP client function [step 2] enable the client function [step 1] configure the

- 15/131 - IM MW100-S16E-1 Ed01 Table 6. Parameters for enabling DNP master function Kind Configuration Function Choice of serial function (driv

- 16/131 - IM MW100-S16E-1 Ed01 2.2.3. Configuration of destination of DNP master/client To use DNP master/client functions of MW100, user shoul

- 17/131 - IM MW100-S16E-1 Ed01 2.2.3.1. Configuration of destination address Screens for configuring destination address of DNP master/client

- 18/131 - IM MW100-S16E-1 Ed01 Figure 7. Configuration of destination address for DNP client Destination address Destination IP address and por

- 19/131 - IM MW100-S16E-1 Ed01 Table 9. Parameters for configuring destination address of DNP master/client Kind Configuration Address DNP addr

- 2/131 - IM MW100-S16E-1 Ed01 Table of Contents 1. Introduction...

- 20/131 - IM MW100-S16E-1 Ed01 2.2.3.2. Configuration of polling period and action Screens for configuring polling period and action of DNP m

- 21/131 - IM MW100-S16E-1 Ed01 Figure 9. Configuration of polling period and action for DNP client Polling period Polling action Screen of DNP 3

- 22/131 - IM MW100-S16E-1 Ed01 Table 10. Parameters for configuring polling period and action Kind Configuration Integrity Poll Period and publ

- 23/131 - IM MW100-S16E-1 Ed01 2.2.3.3. Configuration of unsolicited message Screens for configuring unsolicited message of DNP master/client

- 24/131 - IM MW100-S16E-1 Ed01 Figure 11. Configuration of unsolicited message for DNP client Switch for unsolicited messageScreen of DNP 3.0 cl

- 25/131 - IM MW100-S16E-1 Ed01 Table 11. Parameter for enabling unsolicited message Kind Configuration Unsolicited Enabling switch for requesti

- 26/131 - IM MW100-S16E-1 Ed01 2.2.4. Configuration of command table of DNP master/client To use DNP master/client functions of MW100, user sho

- 27/131 - IM MW100-S16E-1 Ed01 Figure 13. Configuration of command table of DNP client Screen of DNP 3.0 client setting 3 Command setting table

- 28/131 - IM MW100-S16E-1 Ed01 Table 12. Parameters for configuring mapping information Kind Configuration Function Publishing function codes f

- 29/131 - IM MW100-S16E-1 Ed01 2.2.4.1. Behavior of Poll function When Poll function is specified in the function field, DNP master/client fu

- 3/131 - IM MW100-S16E-1 Ed01 2.4.8.2. DNP master setting screen for polling action...77 2.4.8.3. DNP master se

- 30/131 - IM MW100-S16E-1 Ed01 Polling objects and the setting of group number field in command table of DNP master/client functions are shown i

- 31/131 - IM MW100-S16E-1 Ed01 2.2.4.2. Behavior of Read function When Read function is specified in the function field, DNP master/client fu

- 32/131 - IM MW100-S16E-1 Ed01 2.2.4.3. Behavior of Operate function When one of Select + Operate, Direct Operate, Direct Operate NA is speci

- 33/131 - IM MW100-S16E-1 Ed01 Operating objects and the setting of group number field in command table of DNP master/client functions are shown

- 34/131 - IM MW100-S16E-1 Ed01 2.3. DNP slave/server function DNP slave/server functions enable to exchange data between MW100 and SCADAs with

- 35/131 - IM MW100-S16E-1 Ed01 Framework of data mapping between DNP objects and MW100 channels in DNP slave/server functions is shown in Figure

- 36/131 - IM MW100-S16E-1 Ed01 Table 15. Data mapping between DNP objects and MW100 channels Channel Index Object Attribute Binary Input Analo

- 37/131 - IM MW100-S16E-1 Ed01 2.3.1. DNP slave/server specification Basic specification of DNP slave/server functions is shown in Table 16.

- 38/131 - IM MW100-S16E-1 Ed01 2.3.2. Enabling DNP slave/server functions To use DNP slave/server functions of MW100, user should enable these

- 39/131 - IM MW100-S16E-1 Ed01 Figure 20. Required steps to enable DNP server function Screen of server setting [step 2] enable server function

- 4/131 - IM MW100-S16E-1 Ed01 3.2. DNP object implementation table...128

- 40/131 - IM MW100-S16E-1 Ed01 Table 17. Parameters for enabling DNP slave function Kind Configuration Function Choice of serial function (driv

- 41/131 - IM MW100-S16E-1 Ed01 2.3.3. Configuration of destination of DNP slave/server To use DNP slave/server functions of MW100, user should

- 42/131 - IM MW100-S16E-1 Ed01 2.3.3.1. Permission of unsolicited message Screen for permitting unsolicited message to DNP slave/server funct

- 43/131 - IM MW100-S16E-1 Ed01 Table 20. Parameter for permitting unsolicited message Kind Configuration Unsolicited Message Enabling switch for

- 44/131 - IM MW100-S16E-1 Ed01 2.3.3.2. Configuration of destination address Screens for configuring destination address of DNP slave/server

- 45/131 - IM MW100-S16E-1 Ed01 Figure 23. Configuration of destination address for DNP server Destination address Destination IP address and po

- 46/131 - IM MW100-S16E-1 Ed01 Table 21. Parameters for configuring destination address of DNP slave/server Kind Configuration Address DNP addr

- 47/131 - IM MW100-S16E-1 Ed01 2.3.4. Configuration of object table of DNP slave/server To use DNP slave/server functions of MW100, user should

- 48/131 - IM MW100-S16E-1 Ed01 Screen for configuring object table of DNP slave/server functions is shown in Figure 25. About the detail of the

- 49/131 - IM MW100-S16E-1 Ed01 Table 22. Parameters for configuring object table Kind Configuration Channel Top Top channel of MW100 which show

- 5/131 - IM MW100-S16E-1 Ed01 1. Introduction DNP 3.0 (Distributed Network Protocol) is a kind of telecommunication standard and is used at el

- 50/131 - IM MW100-S16E-1 Ed01 Example of the object table configuration is shown in Figure 26. Only the mapped channel data in this table becom

- 51/131 - IM MW100-S16E-1 Ed01 2.3.4.1. Configuration of data variation In MW100, variations of static / event data are configurable. Screens

- 52/131 - IM MW100-S16E-1 Ed01 Table 23. Parameters for configuring data variation Kind Configuration Default Variation Default variation to re

- 53/131 - IM MW100-S16E-1 Ed01 Responded variations to static polls are shown in Table 24. When static data are read with variation zero, DNP s

- 54/131 - IM MW100-S16E-1 Ed01 Responded variations to event polls are shown in Table 25. When event data are read with variation zero, DNP sla

- 55/131 - IM MW100-S16E-1 Ed01 2.4. DNP configuration screens DNP communication functions are configurable using Web service of MW100. Web serv

- 56/131 - IM MW100-S16E-1 Ed01 Anchor points to configuration screens for DNP communication functions are shown in Figure 29. Figure 29. Commu

- 57/131 - IM MW100-S16E-1 Ed01 Configuration screens related with DNP master, slave, client and server function are shown in Table 26. About the

- 58/131 - IM MW100-S16E-1 Ed01 2.4.1. Serial communication setting screen Serial communication setting screen is shown in Figure 30. About the

- 59/131 - IM MW100-S16E-1 Ed01 Table 27. Parameters for configuring serial communication Kind Configuration Function Choice of serial function

- 6/131 - IM MW100-S16E-1 Ed01 2. DNP communication functions MW100 main module has one ethernet port for TCP/IP communication and one seria

- 60/131 - IM MW100-S16E-1 Ed01 2.4.2. IP address setting screen IP address setting screen is shown in Figure 31. About the detail of the conf

- 61/131 - IM MW100-S16E-1 Ed01 Table 28. Parameters for configuring IP address Kind Configuration Host Name Host name of MW100 - ignored (no

- 62/131 - IM MW100-S16E-1 Ed01 2.4.3. Server setting screen Server setting screen is shown in Figure 32. About the detail of the configuration,

- 63/131 - IM MW100-S16E-1 Ed01 Table 29. Parameters for configuring server function Kind Configuration TCP Keep Alive Period of TCP keep alive

- 64/131 - IM MW100-S16E-1 Ed01 2.4.4. DNP communication setting screens 2.4.4.1. DNP communication setting screen for application service DN

- 65/131 - IM MW100-S16E-1 Ed01 Table 30. Parameters for configuring DNP application service Kind Configuration Client DNP address of the DNP cl

- 66/131 - IM MW100-S16E-1 Ed01 2.4.4.2. DNP communication setting screen for protocol stack behavior DNP communication setting screen for pro

- 67/131 - IM MW100-S16E-1 Ed01 Table 31. Parameters for configuring DNP protocol stack behavior (1/2) Kind Configuration Application Confirmatio

- 68/131 - IM MW100-S16E-1 Ed01 Table 32. Parameters for configuring DNP protocol stack behavior (2/2) Kind Configuration Datalink Confirmation B

- 69/131 - IM MW100-S16E-1 Ed01 2.4.5. DNP slave setting screen DNP slave setting screen is shown in Figure 35. About the detail of the config

- 7/131 - IM MW100-S16E-1 Ed01 Basic specification of serial and ethernet port in MW100, which is used as a datalink of the DNP communication, is

- 70/131 - IM MW100-S16E-1 Ed01 Table 33. Parameter for configuring destination address of DNP slave Kind Configuration Address DNP address of t

- 71/131 - IM MW100-S16E-1 Ed01 2.4.6. DNP server setting screen DNP server setting screen is shown in Figure 36. About the detail of the config

- 72/131 - IM MW100-S16E-1 Ed01 Table 34. Parameters for configuring destination address of DNP server Kind Configuration Address DNP address of

- 73/131 - IM MW100-S16E-1 Ed01 2.4.7. DNP object setting screen DNP object setting screen is shown in Figure 37. About the detail of the conf

- 74/131 - IM MW100-S16E-1 Ed01 Table 35. Parameters for configuring object table Kind Configuration Channel Top Top channel of MW100 which show

- 75/131 - IM MW100-S16E-1 Ed01 2.4.8. DNP master setting screens 2.4.8.1. DNP master setting screen for polling period DNP master setting sc

- 76/131 - IM MW100-S16E-1 Ed01 Table 36. Parameters for configuring polling period of DNP master Kind Configuration Master Function Enabling swi

- 77/131 - IM MW100-S16E-1 Ed01 2.4.8.2. DNP master setting screen for polling action DNP master setting screen for polling action is shown in

- 78/131 - IM MW100-S16E-1 Ed01 Table 37. Parameters for configuring polling action of DNP master Kind Configuration Address DNP address of the

- 79/131 - IM MW100-S16E-1 Ed01 2.4.8.3. DNP master setting screen for command table DNP master setting screen for command table is shown in F

- 8/131 - IM MW100-S16E-1 Ed01 2.1. Required options for DNP communication As DNP communication function is not the standard feature of MW100,

- 80/131 - IM MW100-S16E-1 Ed01 Table 38. Parameter for configuring command table of DNP master Kind Configuration Function Publishing function

- 81/131 - IM MW100-S16E-1 Ed01 2.4.9. DNP client setting screens 2.4.9.1. DNP client setting screen for polling period DNP client setting s

- 82/131 - IM MW100-S16E-1 Ed01 Table 39. Parameters for configuring polling period of DNP client Kind Configuration Client Function Enabling swi

- 83/131 - IM MW100-S16E-1 Ed01 2.4.9.2. DNP client setting screen for polling action DNP client setting screen for polling action is shown in

- 84/131 - IM MW100-S16E-1 Ed01 Table 40. Parameter for configuring polling action of DNP client Kind Configuration Address DNP address of the D

- 85/131 - IM MW100-S16E-1 Ed01 2.4.9.3. DNP client setting screen for command table DNP client setting screen for command table is shown in F

- 86/131 - IM MW100-S16E-1 Ed01 Table 41. Parameters for configuring command table of DNP client Kind Configuration Function Publishing function

- 87/131 - IM MW100-S16E-1 Ed01 2.5. DNP configuration commands Extended or added commands to the MW100 specific service (34318/tcp) is shown in

- 88/131 - IM MW100-S16E-1 Ed01 2.5.1. Serial communication setting (YS) This command is used to configure serial communication function. For im

- 89/131 - IM MW100-S16E-1 Ed01 2.5.2. Enabling server function (WS) This command is used to enable server functions. For implementing DNP commu

- 9/131 - IM MW100-S16E-1 Ed01 2.2. DNP master/client function DNP master/client functions enable to exchange data between MW100 and IEDs with D

- 90/131 - IM MW100-S16E-1 Ed01 2.5.3. Enabling client function (WC) This command is used to enable master/client functions, to implement DNP co

- 91/131 - IM MW100-S16E-1 Ed01 2.5.4. DNP master action setting (WM) This command is used to configure action of DNP master. For implementing D

- 92/131 - IM MW100-S16E-1 Ed01 2.5.5. DNP master destination setting (WN) This command is used to configure destination of DNP master. For impl

- 93/131 - IM MW100-S16E-1 Ed01 2.5.6. DNP master command table setting (WO) This command is used to configure command table of DNP master. For

- 94/131 - IM MW100-S16E-1 Ed01 2.5.7. DNP client action setting (WP) This command is used to configure action of DNP client. For implementing D

- 95/131 - IM MW100-S16E-1 Ed01 2.5.8. DNP client destination setting (WQ) This command is used to configure destination of DNP client. For imp

- 96/131 - IM MW100-S16E-1 Ed01 2.5.9. DNP client command table setting (WR) This command is used to configure command table of DNP client. For

- 97/131 - IM MW100-S16E-1 Ed01 2.5.10. DNP client/server address setting (WU) This command is used to configure DNP addresses of DNP client/ser

- 98/131 - IM MW100-S16E-1 Ed01 2.5.11. DNP slave/server object table setting (WV) This command is used to configure object table of DNP slave/s

- 99/131 - IM MW100-S16E-1 Ed01 p5 : Default variation (1 to 6) 1, 2 : in case p1is xx_BI 1, 2 : in case p1 is xx_BO 1